Most optimal air filtration by 3 in 1 filter media. Ideal for direct mounting on gearboxes, oil tanks, fuel tanks and inventory systems.
Two absorbent material (silica gel and molecular sieve pellets material) for an increased water capacity and increased filtration efficiency for applications in the most humid conditions. Combined with a 2μm strainer for optimal prevention of dirt and dust. When the absorption maximum limit is reached, the silica gel turns from red to bright orange. Available in three different capacities.
The special design ensures an optimal flow in which the entire absorbent material is used. The absorbent material is simultaneously protected from splashing oil through an integrated suction rod.
The life of the two absorbing materials are additionally extended by four check valves at the bottom of the enclosure. We only use the two absorbent materials as needed.
The filter materials are interchangeable while the solid line sink adapter on the tank / gearbox remain attached. An additional assurance for closed oil system.
Protect your system against dirt from outside. All breathing systems by:
Oil is hot, air expands
Oil cools, air pulls together
Liquid level changed by machine cycles
Liquid level drops, air enters the reservoir in
Air filter types:
Fuel cap:> 40 microns
Ontluchtingdop 40 microns
Sponge element 10 or 40 microns
Paper element: 3 to 40 microns
Phenolic Resin impregnated paper: 3 to 10 microns
Silica gel elements: 3 microns
